Polyester powder coatings in facade quality
Smooth matte 25 GU +/- 10 (60° angle)
Our polyester powder coatings according to the RAL color system are produced in Europe according to the highest standards and deliver a perfect surface result in flow and color. In addition, the paints are specially produced for exterior use in facade quality and tested according to Qualicoat and GSB. Our metallic powder coatings are produced using the bonding process and thus offer the highest metallic effect quality.
The RAL pearl colors can also be found in the RAL color palette. Please note that the RAL color system is only an approximate guide for powder coating manufacturers. Thus, differences in gloss and color can occur between powder coatings from different manufacturers. Therefore, prior color checks are recommended in order to avoid color deviations.
When processing metallic powder coatings, the electrostatic (corona) process is recommended. Metallic powder coatings must be tested for their suitability for tribo application.
Technical data sheets can be downloaded as PDF files under FAQ.
Grease, oil, scale and oxidation products must be removed from the surface before coating.
Recommendation for exterior use
If the parts to be coated are intended for outdoor use, we recommend coating the grease- and solvent-free surface first with our primer. After stoving, the desired RAL color is applied. This so-called 2-layer process particularly increases the weather resistance of your workpieces for outdoor use. In addition, you can protect the surface from UV-radiation with a clearcoat powder and thus, if desired, change the gloss level as well as the color effect.
Recommended curing time
At 180 °C object temperature approx. 15 - 20 min.
At 60 μm film thickness 9 - 13 m²/kg
Optimum film thickness
- with a 1-layer coating 60 - 100 µm
- with a 2-layer coating 120 - 160 µm
Do you have any questions?
Then please feel free to contact us at email@example.com