Primer Grey Classic

Epoxy resin powder coating primer for very high corrosion protection requirements

Application example (sample shell)

The sample shell shows the color result of the primer.

Note on availability

If the desired container size is not available for selection or individual products are "On request", please do not hesitate to contact us, we can procure most powder coatings within 24 Hours.

Menge

0,25 kg

0,5 kg+ 5,00 €

1 kg+ 10,00 €

2,5 kg+ 42,00 €

5 kg+ 90,00 €

from

14,50 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

SKU: PL-100-05-0701

Description

Powder coating primer based on epoxy resin

Smooth flat matte 10 GU +/- 5 (60° angle)

Our primer powder coating in gray is produced according to the highest standards in Europe and runs a perfect surface in terms of edge coverage, chemical and corrosion resistance. The primer also contains an outgassing additive, ideal for galvanized substrates.

Our classic primer Gray Classic protected the surface and serves as a base for the color coating. The proven quality convinces and protects your workpieces in the long term.

Application

Suitable for the electrostatic (corona) and tribo process.

Technical data sheets can be downloaded as PDF files under FAQ.

Pretreatment

Grease, oil, scale and oxidation products must be removed from the surface before coating.

In case of special corrosion protection requirements, it is essential to observe the technical data sheet regarding pre-treatment on different substrates!

Recommendation for exterior use

After stoving the primer, the desired RAL color or any special color shade is applied. This so-called 2-layer process particularly increases the weather resistance of your workpieces for outdoor use. In addition, you can protect the surface with a clear varnish and thus, if desired, change the gloss level as well as the color effect.

Recommended curing time

At 180 °C object temperature 15 min.

At 200 °C object temperature 10 min.

Theoretical coverage

At 60 μm film thickness 9 - 13 m²/kg

Optimum film thickness

- for a 1-pack coating 60 - 100 µm

- with a 2-ply coating 120 - 160 µm

Do you have any questions?

Then please feel free to contact us at info@pulverlackfachhandel.de!